Therma-Roll
The Therma-roll Insulated shutter range has a choice of 3 profile sizes 42mm, 52mm and 77mm. All of the Therma-roll profiles are Aluminium double skin
profiles, with cfc free insulated core sections, designed to give acoustic and thermal benefits.
Therma-roll also has a choice of operating systems and control options to match all requirements.
Therma-roll 42mm profile
42mm profile sections are designed to interlock to give maximum insulation and acoustic properties, with a thickness of 5mm across the profile the Therma-roll 42mm is ideally suited for domestic and cabinet applications. Small profiles have improved rolling characteristics allowing smaller head space requirement, the 42mm profile only requires as little as 150mm housing box. Every Therma-roll shutter comes complete with reinforced bottom rail section giving added security when closed. When using a manual counterbalance operating system the locking section will be incorporated in a specially designed extruded base rail which has recessed locking bars giving added security.
Therma-roll 43 has a choice of guide sections to suit most applications. All guide sections come complete with brush strips.
All of the above height calculations are based upon a 60mm octagonal axle. If exceeding a span of 3000mm please allow for a 70mm axle which may alter the headplate size Please call to verify your plate details prior to ordering.
Colour Option
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Therma-roll 52mm profile
All of the above height calculations are based upon a 60mm octagonal axle. If exceeding a span of 3000mm please allow for a 70mm axle which may alter the head plate size Please call to verify your plate details prior to ordering.
Colour Option
|
|
|
|
 |
 |
|
|
|
Texured Wood
 |
 |
Therma-roll 77mm profile
Sliding head plate mechanism (below) shown in both fully lowered and fully open position.
Therma-roll 77 has standard 90mm or 75mm guide section complete with twin brush piles to eliminate dust, debris and sound from passing through the guide when the door is in the closed position. Optional 150mm guide section is also available.
All Heights are inclusive of headplate 360mm Steel Headplate All of the above height calculations are based upon a 80mm octagonal axle. If exceeding a span of 4500mm please allow for a 100mm axle which may alter the head plate size. Please call to verify your plate details prior to ordering.
Colour Option
|
|
|
|
 |
|
 |
|
|
 |
 |
|
Texured Wood
|
|
*Mahogany foil finish comes with a standard brown internal finish
With a beige internal finish for the Golden Oak
Operating Systems
Therma-roll is available with a choice of operating systems to suit all application requirments.
Electric operation. Using Somfy tubular motors Therma-roll can be power driven with ease, with the choice of manual over-ride options for doorway shutters and non over-ride options for window shutters. A range of Somfy motors utilising electronic limits are available to match all applications where hard wiring visibility is an issue.
Tape winder box operation is available on the Therma-roll 40mm and 52mm profile shutters. Allowing easy operation from the internal elevation of the building.
Control Options
In conjunction with powered operation a selection of control options are available.
- Keyswitch- Externally mounted security switch supplied with two keys, flush fitting or surface options
- Standard Dial Switch- Internally mounted wall switch controlling a single shutter, flush fitting or surface mounted
- Wireless Remote Systems- Allowing the control of groups of window shutters via one remote switch.
- Remote Control Systems- Used in conjunction with a safety device the remote system can be used on any application.
- Specialist Group Controls- Specialist control systems to manage a full building can be designed to allow shutters covering fire exits to be opened on activation of a fire alarm system. Individual room controls including light integration systems can also be catered for.
Application styles
Therma-roll can be supplied in a range of application styles .
In-Built System
In Built system allows the shutter box to be hidden completely when viewed from the building exterior.
- The head box is a upvc section with a removable
internal access panel see Fig 3. - Designed for use with new build, the system can also be integrated when refurbishing window profiles.
- Recessing the internal block work to accommodate the guide section allows the guide to be flush with the outside face of the finished brickwork see Fig 2.
- Using a standard step lintel to create the space required to hide the head plate system above the external finished brick line.
- The shutter can either be fitted directly to the window system off site, or fitted directly to the wall before the window is installed.
- The window section requires an additional spacer attached to each side to ensure that the glass line does not interfere with the finished external brickwork.
Standard Face Fix
Standard Face fix is used for most retro-fit
applications, using standard head plates and
full box cover, this system sits directly onto
standard layout brickwork with the box
surface mounted above the window opening.
When using face fix with certain applications
a base cill angle may be required when the
existing window cill is not suitable for the
shutter to close onto.
Standard Reveal Fix
Standard Reveal Fix allows the shutter to fit between two parallel surfaces. All shutters have a full box which includes a back box ( Fascia) that hides the barrel mechanism. On wider spans where the fascia is unsupported we advise the use of a stiffening angle to help ensure the fascia stays rigid. The over-ride or gearbox outlet can be positioned to either exit from the front of the plate or the back, allowing operation from inside or outside. This application is commonly used for recessed doorways and cabinet applications.
Download Brochure
 |
|